The Tech Lord ⊕ `Lex Pendragon

https://QuarteredCircle.net/@LexPendragon

- "Powerful Ass Nerd"
- Hometown: Pittsburgh, PA, USA
- Teacher of Pentjak Silat Poekoelan Tjimande Batin
- Staff on Bureau 42
- "Bad influence"
- "Fighting the universe and how it is designed is kinda his thing 😉 "

I'm told I am usually talking about comics, magic, or dad stuff.
[Account name is my email, too.]

Phone: 818.T3k.L0rd
Belief Systems: Technomagic, Discordian, Crackpot
Blood Type: Sumatra Roast
Pronouns: He/Him/IT Guy

Public Key

npub137nfkek7907g23v3n0lwddtt8mxxc20qxpp6254fu8e0y3u3ee4syyg6kc

NIP-05 Address

lexpendragon_at_quarteredcircle.net@momostr.pink

Profile Code

nprofile1qqsglf5mvm0zhly9gkgehlhxk44nanrv98srqsa92257ruhjg7guu6cprpmhxue69uhhyetvv9ujumt0d4hhxarj9ecxjmntrnlkur

Publishing to

relay.momostr.pink

Author Public Key

npub137nfkek7907g23v3n0lwddtt8mxxc20qxpp6254fu8e0y3u3ee4syyg6kc

Show more details

Last Notes

2026-03-30 14:45:48 UTC

- reply

You don't know what's in that glass!

2026-03-27 14:18:45 UTC

- reply

Okay, I found my answers.
https://switch.hacks.guide/
First, you need to do stuff including shorting pins on the Switch to get to a recovery mode then then dump the switch to blah blah blah.
I can do all this, but it seems like it's a bit of a project, and I have enough of those. What I really need is time to stop doing all my other 💩 and just go play Zelda :Hyrule_Shield: , and adding a new project isn't going to make me do that.

2026-03-27 13:38:11 UTC

I wanted to try to get into that scene to play my Nintendo Switch game on my laptop.
Step one, found an emulator, that wasn't hard.
Starting it, however, starts out with:
> Pre-Requisites
>
> Firmware dumped from your console
> Keys extracted from your console
> Games dumped from your console
...well. where/how do I get that!?

2026-03-24 14:19:20 UTC

Booting up the Tiny11 ISO (over iVentoy) and it gets a weird screen resolution. Any idea how to make it... not?
https://QuarteredCircle.net/system/media_attachments/files/116/284/579/080/091/408/original/8c7bfa933f583686.png

2026-03-24 13:53:24 UTC

- reply

*Maybe. I run Win 11 on it purely because I use Linux everywhere else and was afraid I was getting out of touch. Win 11 is so painful to use because of all the things Tiny 11 would probably take out, but if I do that, I am negating the entire reason for using Windows in the first place.

2026-03-24 13:52:12 UTC

- reply

I am going to try this Tiny11 thing, because having an ISO works way better for my setup.
I have a feeling I am about to reinstall my own laptop with this.*
Thank you!

2026-03-24 13:26:37 UTC

- reply

MicroWin or Tiny11? What are these?

2026-03-24 13:11:39 UTC

I have stacks of old hardware. I had two people discuss insanely old computers, and wanted something newer. In the spirit of recycling, I am preparing those.
I also was going to make an extra Linux system for one of the intermediaries to prove how easy Linux was.
I have three systems, the person I don't know at all needed Win 11 for work. The person I care most about was getting Linux. The person in the middle 'probably can work with' Linux, but would really prefer Windows because they're a normie and has never even seen the alternatives.
One system is a six year old system. That will run Windows 11.
One is something else, but the processor might not support Windows 11.
The third is an older system, the processor is just outside of the Win 11 range, but the system is decent. That's clearly going to be a Linux system.
[The Point]
The person I like best would be getting the worst hardware. The person I never met ends up getting the best.
It feels like I am doing this wrong.

2026-03-15 16:48:40 UTC

It's happening!!!
They're going to animate and bring back :serenity: #Firefly!!
:boost_ok: https://www.instagram.com/oncewewerespacemen/reel/DV6Js56jT3F/
https://QuarteredCircle.net/system/media_attachments/files/116/234/238/899/015/295/original/6d2f5a0dba2578ca.png

2026-02-23 15:49:54 UTC

- reply

There's two ports on this motherboard, both are using the r8169 driver, and also the 8125 or 8126 respectively. The r8169 has loaded and works, it it wouldn't be connected now.
How do I tell it to keep doing what it is doing, but not try to use r8169 for only the r8126 port?

2026-02-22 21:36:11 UTC

:boost_ok: Linux Network Question:
I have a new motherboard, which has two ethernet ports, one is the Realtek 8126 port, which is 5G, and the other is Realtek 8125 port, which is 2.5G.
The eth0 seems to be the 5G port, and eth1 is the 2.5G.
eth0 does not connect.
alexius@Chance:/etc/sysconfig/network> lspci | grep Ethernet
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8126 5GbE Controller (rev 01)
eth0 is unplugged at the moment, but if I run "ip a" it isn't even listed there.
...where do I go to tell it to actually see that one?

2026-02-13 01:49:38 UTC

Something tells me this specific text box isn't talking about Species 8472.
( 👏 :trekbar: )
Star Trek - Voyager - Homecoming #5 #HorizonLabs
https://QuarteredCircle.net/system/media_attachments/files/116/060/795/390/567/778/original/218aa4afb3902e25.png

2026-02-02 16:03:33 UTC

- reply

Wait...
If I go to QuarteredCircle.net from outside (where it works fine) the local router forwards the request to NPM. NPM then pushes it on to Chance's internal network.
If I am inside, it gets Chance's IP. I would need to point QuarteredCircle.net's internal DNS entry to NPN, not Chance, wouldn't I?

2026-02-02 15:57:27 UTC

- reply

So how do I tell things that when connecting to 192.168.x.x to use the same certificate as QuarteredCircle.net and whatever.my.public.IP is?

2026-02-02 15:55:58 UTC

- reply

I think that's the wrong direction. Chance and Volstagg (my laptop) both run the same OS, same network, and different resu---
Actually, let me try lynx just to verify... nope, lynx on Volstagg gives the same error, but Waterfox doesn't.

2026-02-02 15:43:32 UTC

- reply

I was inclined to start by blaming DNS, but my laptop and phone are also on the local network, getting the same DNS server (which is also @npub1ndp…uz86) and there's no issues from that direction. It's just on @npub1ndp…uz86 herself.

2026-02-02 15:11:22 UTC

- reply

I don't think I followed those details. (That's a me problem, not you.)
Checking with a verbose curl gives me a resolution (also from Chance, which resolves to her internal IP,) and then gets an expired certificate. I am sure is the one from before I switched to Nginx Proxy Manager, because it was working fine until a few days ago when that old certificate expired.

2026-02-02 14:48:08 UTC

- reply

Let me reword this:
When in the shell on a website host, how do I tell it to check the certificate that is publicly available; not a local certificate?

2026-02-02 13:15:00 UTC

I don't think I have had enough coffee yet, let me figure something out:
@npub1ndp…uz86 hosts Mastodon.
Chance has a local SSL from when I was manually updating it with Let's Encrypt.
I set up Nginx Proxy Manager, which handles it now.
It works, because you can read this, but if I am on Chance herself and try to open https://QuarteredCircle.net, it get a bad SSL.
...how do I correct that?
Do I need a script to copy the certificate locally every day?

2026-02-02 12:37:02 UTC

Good morning and happy Imbolc, :QuarteredCircle: Radians!
Punxsatawney Phil saw his shadow, which I think is too fake because there was far too much snow to see any shadows for all the reflected light, but still: Six more weeks of winter. See you at Ostara, I guess.
https://QuarteredCircle.net/system/media_attachments/files/116/001/058/249/087/060/original/7cb2654814387ca7.png

2026-01-29 14:57:35 UTC

RE: https://mas.to/@nemo/115977538504295603
I expect #Veilid would also have the issue. The issue is more or less the AI standing over your should and seeing everything you see, so there's not much the software can do at that point, is there?
#note19vn…e5ef

2026-01-28 01:18:06 UTC

- reply

Harlan, Edison Class, but not named for Harlan Ellison?
Sure.

2026-01-20 22:05:55 UTC

- reply

It deleted people.

2026-01-19 02:28:27 UTC

I watched Tron: Ares, and while there were plenty of plot details that could have gone better, but it was enjoyable. It was definitely pretty, and who can argue with Nine Inch Nails?

2026-01-03 23:49:01 UTC

- reply

I agree. This is horrible.
https://QuarteredCircle.net/system/media_attachments/files/115/833/831/861/576/548/original/e8127eeb26ead5f3.jpg
https://QuarteredCircle.net/system/media_attachments/files/115/833/831/865/612/494/original/3249e35296ee28b2.jpg

2026-01-03 23:32:35 UTC

I hate how shrinkflation means adding more packaging inside the packaging to hit the fact that you have less. My wife just opened a gnocchi bag to find a box, and inside it was a bag of gnocchi about one fourth the size of the original bag. The original claims five people can eat it. The amount of gnocchi wouldn't feed me.

2025-12-29 15:36:28 UTC

- reply

I did get one second hand, which is only holds two, but I am pretty sure I do not have the base for it anymore.
Maybe I'll get out the drill and make it all work...

2025-12-29 14:34:34 UTC

I would like to find a new way to arrange my monitors. I have a ton of screen real estate, which is what I like, but I just feel like I am in need of a change.
alexius@Volstagg:~$ xrandr
Screen 0: minimum 320 x 200, current 12659 x 4320, maximum 16384 x 16384
The catch is that I don't think I can move the physical monitors in any particular method.
Maybe it's time I go get that dual-weilding monitor arm and see if I can make that work... 🤔
https://QuarteredCircle.net/system/media_attachments/files/115/803/342/289/228/046/original/6f5ba9909cd8b25b.png

2025-12-16 22:56:44 UTC

- reply

I'll try that. I was kind of afraid that would bake the glue more.

2025-12-16 22:29:03 UTC

#3DPrinter help, please?
What do I do?
Way back, I had worked really hard to get a solid, over burnt piece of TPU scraped off my print sheet. It wasn't TPU, it was the plastic coating on top of the print sheet. I ended up pulling the entire coating off, figured I wouldn't use that side. Since it was the only one I had, I flipped it over and put the other side down. It adhered with whatever glue held that coating on.
Today, PETG stuck to this smooth side, and while trying to get it off, the print bed scraped again. I am going to order a new one, but before I can use it I need to get this one off the bed. It is STUCK!
Pulling it pulled the near left corner up (it's not sitting crooked) and with the plastic spatula thing, I have only been able to get it this far.
What do I do? I was just going to keep yanking as hard as I can until I overcome this glue, but I am afraid I am going to rip the bed under it off. I already am going to have to go figure out how to get it to re-level itself.
https://QuarteredCircle.net/system/media_attachments/files/115/731/559/760/940/204/original/441af314979b44e8.png
https://QuarteredCircle.net/system/media_attachments/files/115/731/560/369/139/607/original/77476e13fc7952e0.png

2025-12-14 14:34:49 UTC

I keep forgetting...
The Void is for screaming, The Abyss is for staring, right?

2025-12-13 04:06:33 UTC

- reply

started giving me my Google Chat notifications again. I guess a recent update fixed it.

2025-12-11 16:19:32 UTC

- reply

I completely agree, that's why waiting for it to get to Prusa how I was going to get it.
I can live with a bit shallower Y area to print ing, I don't use my full volume very oft--- ever.

2025-12-11 15:48:10 UTC

I just learned that Prusa has announced the new #3DPrinter color-change equipment:
https://www.prusa3d.com/applications/prusa-3d-printers-with-bondtech-indx_243519/
Not only was it announced, the early adopters option sold out in five hours. It looks like they're partner will have it early next year, and in the spring it'll be at Prusa to buy. I am getting it then!

2025-12-05 00:47:09 UTC

I love that Ryan North isn't even vaguely downplaying how absurdly overpowered the Fantastic Four are.
Fantastic Four #6 #HorizonLabs
https://QuarteredCircle.net/system/media_attachments/files/115/664/178/391/249/460/original/a8d14acf351769f9.png

2025-11-29 17:13:42 UTC

- reply

Thank you, I just did:
https://discuss.grapheneos.org/d/28511-pixel-9a-recently-lost-notifications

2025-11-29 00:39:24 UTC

- reply

I appreciate the troubleshooting. Each of those things seems to have already been granted.
https://QuarteredCircle.net/system/media_attachments/files/115/630/182/400/093/404/original/97cc3b4d0529914d.png
https://QuarteredCircle.net/system/media_attachments/files/115/630/182/399/807/525/original/26a66cadfd0bc61b.png

2025-11-29 00:05:39 UTC

My @npub1kwa…e0nj on my Pixel 9a stopped giving me notifications from Google Voice and Google Chat.
None of my setting changed since it worked, so... Help?

2025-11-24 15:04:36 UTC

- reply

Here's what I see:
https://QuarteredCircle.net/system/media_attachments/files/115/605/282/848/680/626/original/a33560c005eb8cc5.png

2025-11-19 13:24:11 UTC

- reply

Two biscotti is still not a breakfast, I don't care if you're busy. Knock it off.

2025-11-18 17:34:05 UTC

How many times do I have to tell you, `Lex? A single biscotti and a pot of coffee is not a breakfast.
You do not have to get your workout in before you are allowed to eat again.
🤬, your hyperfocus is going to use malnutrition to murder you.

2025-11-07 12:43:18 UTC

Good morning, :QuarteredCircle: Radians!
My day appears calm.
Happy Friday, everyone!

2025-10-28 16:08:22 UTC

- reply

And to be transparently honest: I didn't.
I don't see the screw that was here for it, the two I have within arms reach aren't the same size, so I just pushed it back in and set it carefully down to see if it works without me having to actually screw it in. I just need to not touch it for however long it takes to erase.

2025-10-28 16:04:51 UTC

- reply

Answer:
Don't be a lazy tech and actually screw the nvme into the USB adapter so that it doesn't fall out when you plug it in, you dolt.

2025-10-28 15:48:58 UTC

I have a 1 TB nvme drive. It read as 1TB, and was usable for a moment, then failed and read as 0b. I moved it to a USB adapter and brought it to my laptop and it still reads as 0b.
What do I do to make it re-scan itself?
[Edit to add]
Oh, this error might be part of my issue:
Sense Key : Hardware Error [current]

2025-10-25 03:46:19 UTC

- reply

Which one is Communist Himbo?
All the rest are spot on, but I was getting stuck on this one.

2025-10-19 01:32:59 UTC

- reply

It looks like two, but because you asked and two was the obvious answer, I am suspicious and OMGah you posted what looks like three or four hiding in there.
Dewd, you gotta give us time to guess!

2025-10-14 23:41:28 UTC

- reply

Not really a feasible option...
https://QuarteredCircle.net/system/media_attachments/files/115/375/159/542/862/151/original/d1655f919a63d10e.jpg

2025-10-14 21:37:10 UTC

How do I made it so the #KDE #Plasma touch screen I am using will right-click when I long-press on the screen?

2025-10-12 17:30:59 UTC

I like this meme.
https://QuarteredCircle.net/system/media_attachments/files/115/362/380/335/209/596/original/31ff823f66fb435d.png

2025-10-10 13:40:02 UTC

Linux system:
If I plug it in, I do not want it to turn off. (Got this far)
Instead, I want a screensaver to come up with the time displayed, real big.
Windows did this pretty easily, but I don't think KDE has anything for screen savers, does it?

2025-10-06 03:17:08 UTC

Aw we could to refer to it as CWII (a la WWII) or "The Second Civil War"? I bet Time-Warner or whoever owns The CW lobbies against that first option, but the other one is long. Maybe 2CW? Second Civ.?

2025-10-05 15:54:58 UTC

My Mastodon feed is not all in English. English is the only language I read, but I have followed a few bilingual (or more) folks, and I love it. I want the exposure to other cultures, the chance to see what non-English speakers are saying, and I have a handy Translate add-on so I can.'
You'd never get this on a siloed site, it would have choked anything I couldn't read out of my echo chamber before I even could realize it existed.

2025-09-19 00:37:18 UTC

Google Lens let you hold up your phone at some text in another language, and it would translate it to English for me.
Is there another app like that I can get that isn't... you know, Google?

2025-09-16 20:01:45 UTC

You've got to be 🤬ing with me.
The "Solar Trail Camera, 5K WiFi Game Camera" doesn't actually have WiFi. There's a FAQ question:
Can't connect to home Wi-Fi router
The WiFi trail camera can only be connected with your phone by the App TrailCam Go. It is not intended for surfing the internet via WiFi. Rather, it is designed to conveniently read photos or videos and set up cameras.
So when they say WiFi, and they say it a lot, they don't mean you can use WiFi.
Now I gotta go hack my way into this stupid camera so I can get pictures off of it.

2025-09-12 00:36:48 UTC

What possible driver am I missing?
I have this projector, presenter, pointer thing. The top button worked as page up. The middle button activates the laser. The bottom was page down. There is an infrared LED on the top next to the laser opening and an infrared receiver that plugs in through USB to my computer.
After a reinstall of Linux, it doesn't work for page up or down anymore. The laser pointer works My keyboard works, obviously.
https://QuarteredCircle.net/system/media_attachments/files/115/188/513/110/316/343/original/ecb7ea3fe100c4b8.jpg

2025-09-05 11:37:47 UTC

- reply

Do it! If they are worth being on a pedestal, they can get back into it on their own.
That is, take shots at them, the real ones can take it, the face ones go away.

2025-08-22 17:46:46 UTC

Google Maps included "Pass $Store on the left." Details on the directions it gives me now.
🤬 you, Google. You used to be so kewl.

2025-08-19 11:22:26 UTC

“Two possibilities exist: either we are alone in the Universe or we are not. Both are equally terrifying.”
― Arthur C. Clarke

2025-08-13 14:04:03 UTC

- reply

There will be a lot who do that, completely unprotected.
There will be a lot of compromised bot-net systems in a lot of people's homes, too.
My primary concern was that I feel like a bad person for allowing it to happen to someone on a computer for a person that I previously was responsible for.

2025-08-13 13:38:38 UTC

I have a client that is going out of business, and has been for years. They're officially ending in September now (maybe.) They have been letting the two remaining employees keep their laptops, I just need to remote in, remove the anti-virus and my software so they are on their own.
The fact that they have Windows 10 systems, which is a big deal in two months, is not my problem.
[I am tooting this as a confession. I feel guilty for not going out of my way to explain that or to even try to upgrade these old systems, if they can be upgraded.]

2025-08-09 15:06:54 UTC

I just searched for a new Android SSH client, preferably one that lets me make a home screen shortcut directly to a server.
Unfortunately, search drowned in monetized lists and AI slop, so I ask here:
Android SSH client recommendations?

2025-08-08 18:19:05 UTC

- reply

Do you know of any other good alternatives, then?

2025-08-08 18:16:33 UTC

- reply

Yeah.... Though ultimately if I want it as a chat app and an option for my D&D video calls, it'll still do.

2025-08-08 17:59:57 UTC

Wait, so I can't use Signal from more than one Android device?
I have it on my Linux desktop and my phone, why can't I also have it on my other phone?

2025-08-08 17:34:27 UTC

- reply

That is a perfect ringtone. 👏 👏 👏 👏 👏

2025-08-08 16:07:45 UTC

I need one thing before I actually switch my mobile plan over to this new phone.
...What do I want my ringtone to be?

2025-08-07 21:24:48 UTC

Anyone seen a higher quality version of the Rocky Horror 25th Anniversary Special from 2000?
(Sorry to break it to anyone who needs to hear it, but the Rocky Horror Picture Show just turned 50.)
https://www.youtube.com/live/2y7Q5KNszJQ

2025-08-02 15:07:09 UTC

- reply

PLA.
I was going to order a Textured because I had one on my old printer and it seemed to let go nicely.
What's Satin? I mean, I know the fabric, but what's a plate shaped that way?

2025-08-02 14:56:55 UTC

I had a print that completely failed. It started off getting stringy, then the entire thing started printing shifted to the side. After this happened the second time, I cleaned the nozzle and ran calibrations. Then tried again. This time it made weird noises, and didn't get any filament out, until I hit stopped it, then I got a steady stream.
There were bits of filament on the plate, at least that's what I thought it was, but apparently it's a coating that had been damaged, and when I scraped it off, it peeled the coating off.
:picardfacepalm:
#3DPrinting
https://QuarteredCircle.net/system/media_attachments/files/114/959/748/168/857/331/original/9db76531aeee180f.png

2025-07-31 19:10:14 UTC

- reply

Finally, water came back on!

2025-07-31 17:50:17 UTC

- reply

Still no water. The water company (West View Water) sucks and barely acknowledged that is was being worked on.
I smell and want a shower.

2025-07-31 15:14:20 UTC

☕CoffeePunch👊 .
I have reached over and picked up my empty coffee pot four times now.

2025-07-31 10:59:00 UTC

Woke up early, (because :old-man-yells-at-cloud: ) and the water is out.
I went back to bed.

2025-07-24 13:30:16 UTC

- reply

The `munks are okay!
There was much rejoicing in Our Father of Perpetual Refrain. One `munk is seen here doing a cage dance for the grackles.
https://QuarteredCircle.net/system/media_attachments/files/114/908/444/836/003/410/original/7ddce7f1000b031c.mp4

2025-07-24 13:14:20 UTC

:QuarteredCircle: Radians!
Sorry, I am late. I started getting tickets from clients the moment I picked up the coffee pot before I got to my desk, and it's been non-stop since. It seems to have calmed down now enough for me to tell you all:
Good Morning!
Over at the bird feeders, it was surprisingly empty, but when I saw some sort of falcon or hawk swoop down near the window, I understood why it was deserted. I hope everyone's okay, though at the moment it does seem extra quiet over at Our Father of Perpetual Refrain. Hope all the `munks are okay!
(A short while later, here's the birds coming back and... Hey! Lofi! Get out of the gazebo!!)
https://QuarteredCircle.net/system/media_attachments/files/114/908/375/458/162/687/original/4b78b45557957acb.png
https://QuarteredCircle.net/system/media_attachments/files/114/908/380/402/754/173/original/35e8469862d90b58.png
https://QuarteredCircle.net/system/media_attachments/files/114/908/383/701/840/951/original/fd6a1369cbb9fc28.png
https://QuarteredCircle.net/system/media_attachments/files/114/908/385/746/058/213/original/a6cd350a74f49a83.mp4

2025-07-24 01:20:40 UTC

The Medical logo in Babylon 5 looks like Trogdor :Trogdor: if you glance at it.
https://QuarteredCircle.net/system/media_attachments/files/114/905/574/416/684/292/original/b60f4335daccf508.png

2025-07-22 02:05:58 UTC

- reply

"Slide to the side" might be tricky...
https://QuarteredCircle.net/system/media_attachments/files/114/894/430/107/141/571/original/ae76f62160a1f075.jpg

2025-07-22 02:00:59 UTC

- reply

That looks great for the round ones. I'll search up a rectangle version and that might help for what I'm trying to do.

2025-07-22 01:47:58 UTC

I got my new part for my 3D Printer, and I test it and it works again. I am not going to go put TPU in it because does that this late at night is only asking for pain.
I also got my magnets for my Initiative Hammer, but getting tiny magnets into places my fingers don't reach, getting glue on to one side before you do it without getting glue all over everything, and keeping the polarities for the magnets correct throughout all of that is hard to do, even if you had two working hands. I'll muddle through, because this is a great thing and I want to finish it, but... it's daunting and I haven't felt the confidence to launch into it.

2025-07-21 21:45:05 UTC

- reply

I'm going to give a memory foam one another try.

2025-07-21 14:12:02 UTC

- reply

I think you're right. I've had no luck with memory foam in the past, but I think I am going to have to try another one.

2025-07-21 13:35:16 UTC

Star Trek :trek: fans:
Where can I buy these pillows?
They appear to actually only be a regular pillow in a decorative sham, but the shape is sturdier than most pillows I seen, since it holds it. It looks like the oversized square pillow thing my wife picked up, but is actually pillow shaped.
(I'm interested in a sturdy pillow more than one that is actually #StarTrek themed, but I wouldn't be disappointed with Federation bedding.)
https://QuarteredCircle.net/system/media_attachments/files/114/891/465/774/507/119/original/f800d1dcb2e22059.png

2025-07-18 22:01:01 UTC

Why does Windows not have a built in .rar extractor? It can include mail clients but won't let you decompress files.

2025-07-15 18:20:39 UTC

- reply

I'm in a chat with support right now (Hi Michele!) and I bet that ends up being the solution. Hopefully this is under warranty enough that they send me one. (I've certainly spent enough with them...)

2025-07-15 18:09:08 UTC

- reply

I agree, that's what it sounds like, but I checked through the wires and they seem alright to me. I don't have tools (or a right hand that works) to let me resolder anything.

2025-07-15 17:48:17 UTC

- reply

Yeah, I checked them though and they seem good. Additionally, when I do anything on the printer that needs to reference them, the display resets, goes through the bootloader, then comes to that error. Then tapping causes it to go through the bootloader again then go to the regular window. It tells me I need to run the calibration before I can use it (because I tried a factory reset.)

2025-07-15 17:41:06 UTC

- reply

Unfortunately, when I reassembled it, I started getting error #31208 and can't get past it.

2025-07-15 16:18:09 UTC

#3DPrinting question:
I am swapping out my nozzle. The new one is clearly bigger where it extends beyond the extruder. How do I tell my printer and PrusaSlicer that?
https://QuarteredCircle.net/system/media_attachments/files/114/858/146/701/503/234/original/3990abe31b006352.png

2025-07-10 14:27:45 UTC

I have a #3dPrinting question:
In the Prusa Core One, there's two screws that I can adjust to make the printer put more or less force on the filament.
When printing with TPU, I need to loosen this a lot... I think.
I need to learn how to gauge how much force is the right amount so that I can change it to print TPU and change it back for PLA/PETG. Before I can even start searching for learning, I need to learn the names for each of the things I just referenced.
Can anyone suggest anything, or even just repeat what I am asking using the correct jargon?
https://QuarteredCircle.net/system/media_attachments/files/114/829/390/262/673/332/original/0fa38f8b11893ef3.png

2025-07-07 22:54:36 UTC

My phone case is breaking. I should prepare to replace it, but the phone is a Pixel 4 XL, so I think I should be preparing to replace the phone. I also have been saying that for years, now.

2025-07-04 16:00:01 UTC

- reply

I found a build for it, but I can't find the basic instructions on how to get started. I found more than once place telling how they don't support unsupported builds, but nothing saying "step one, download this, step two, put it on an SD card and put it in, step three, press and hold..."
The instructions I did find skip to "Flash this one the device..."

2025-07-04 15:54:31 UTC

- reply

Old_Man_Yells_At_Cloud.gif

2025-07-04 15:44:06 UTC

- reply

I use it to display Smart Life and the the front door camera as a security camera view. The version of their app for that old version of Android crashes, and the version that doesn't crash needs a newer OS. It's got a big screen, and I 3D Printed a holder for it, so I would like to use this device for it, so we're trying alternative OSes.

2025-07-04 15:36:11 UTC

You Mastodonians can tell me, right?
It's been a minute... I want to reflash a Galaxy Tab A from 2016, what OS did I want to look for? Was it LineageOS? Cyan Mod or something?

2025-07-01 03:10:55 UTC

Wow, I uploaded that video and Mastodon is serving it and tanking my cable connection. Hope that evens out before tomorrow.

2025-07-01 02:57:23 UTC

- reply

It's not bad. It's not a pillow or anything, but you can mess with it.
https://QuarteredCircle.net/system/media_attachments/files/114/775/725/946/317/475/original/f7f78e37c76dcb6d.mp4

2025-07-01 02:36:37 UTC

I have leveled up in #3DPrinting!
New ability unlocked: TPU!
https://QuarteredCircle.net/system/media_attachments/files/114/775/642/783/180/168/original/3a5332afa160ca3c.jpg

2025-07-01 01:37:32 UTC

- reply

well... I think I got to the source of the issue.
https://QuarteredCircle.net/system/media_attachments/files/114/775/411/951/210/438/original/ce8e23556949fd04.jpg
https://QuarteredCircle.net/system/media_attachments/files/114/775/413/394/508/024/original/7715997a7871085f.jpg

2025-07-01 00:50:05 UTC

- reply

Well, that looks simple!