napierge

Self-learner of technologies especially IT
🐇
Be open source, live in freedom and cherish your privacy. All of that are not limitless neither absolute dogma

avatar: https://unsplash.com/photos/koala-bear-sleeping-on-tree-Yg_sNKOiXvY

header:https://unsplash.com/photos/mountain-under-starry-sky-fHL89LhlrB4

Public Key

npub1d459ljgypzj8xxxqcxmvyuaj6tgn9hj03vyucey9featzdje5u3sd78n3f

NIP-05 Address

napierge@mastodon-bsd-cafe.mostr.pub

Profile Code

nprofile1qqsx66zleyzq3frnrrqvrdkzwwed95fjme8ckzwvvjz5u743xev6wgcpz3mhxue69uhhyetvv9ujuerpd46hxtnfduqs6amnwvaz7tmwdaejumr0dsuw2p4k

Publishing to

yabu.me

nos.lol

relay.damus.io

Author Public Key

npub1d459ljgypzj8xxxqcxmvyuaj6tgn9hj03vyucey9featzdje5u3sd78n3f

Show more details

Last Notes

2026-04-06 15:38:51 UTC

If you have problem to run #geekworm #x735 #script on #raspberrypi4 with the #freedombox to run the #fan #x735v2.5
try out my solution. I am not sure if my solution is technically right because I feel that just add new #overlays by copying is not proper way how to do it, but it works. If you know how to do it by better way please let me know... At least my first guide which could really help to someone, because I could not find anything relevant on the internet about this topic.
https://nappex.github.io/posts/hardware/run-geekworm-x735script-freedombox.html

2026-03-30 11:54:10 UTC

- reply

@nprofile…vf35 how do you list these data, please? To check my tunnel...

2026-03-28 14:23:01 UTC

Hello fediverse, does anybody have experience how to run x735 v2.5 geekworm on freebox or debian trixie, please? Hardware is rpi4
#freedombox #debian #trixie #geekworm #x735 #rpi4

2026-03-01 14:30:52 UTC

- reply

@nprofile…vf35 I was not bored yesterday when I could not forced the pkg to boostrap itself to finish the whole process 😄

2026-02-24 18:18:43 UTC

- reply

@nprofile…nwj6 @nprofile…mzdk divam se ze mate asi pravdu vzdyt ono to vzniklo teprve 2024

2026-02-24 05:29:18 UTC

- reply

@nprofile…nwj6 @nprofile…mzdk ale wero moc v cesku nejde pouzit ne?

2026-02-02 21:15:08 UTC

- reply

@nprofile…4lul k cemu to bude dobry? zpevneni krovu? nebo novy prostor se sadrosi + zatepleni?

2025-11-15 16:35:01 UTC

- reply

@nprofile…x4wz haha I have currently same mate tea on desk as on the picture of the post you sent 😅

2025-11-13 17:58:36 UTC

- reply

@nprofile…v4sy jak se v tom vsem vyznate to mi hlava nebere 😅🤔👍

2025-11-08 13:55:21 UTC

- reply

@nprofile…mxzg @nprofile…07m8 @nprofile…60xu jeste jsem objevil tento fork ff https://floorp.app/en-US

2025-05-03 20:33:38 UTC

- reply

@nprofile…sr9k thank you and then you just tell to clonezilla create a new hardrive from this directory? that a new harddrive will be able to boot windows again? (if we will pretend that another hardware is not a problem)

2025-05-03 19:19:33 UTC

Hello, I'd like to ask you to help me rectify my general plan or maybe the whole intention of to install freebsd to rpi4 as a server where I'd like to have jail for nextcloud, jail for homeassistant and nas. I'd like to use for freebsd the ssd storage with zfs 1TB (connected by USB), data encrypted, set wireguard to my external vps to be able to connect from anywhere. The whole idea is powered to learn something and really own my data.
plan:
1) dd rpi4 image of freebsd to SD card
2) boot SD card
3) manually set zfs to ssd connected by usb. set encryption to everything else than / /usr and /boot, if I used FDE I am unable to connect just with ssh then
4) manually install freebsd without bsdinstall command because of encryption. I am not sure about this point how to do it
5) reboot to sd card again, import zpool = mount the ssd disk
6) set correctly boot files (copy) the rpi4 it should be copy of u-boot.bin and maybe other files from https://github.com/raspberrypi/firmware/tree/master/boot
but I am also not sure about this point what is the right solution. When I ve just install the freebsd to ssd with bsdinstall without encryption the freebsd did not boot from ssd even though I set ssd as first to boot in order with rpi-eeprom. so some tweaking is needed I suppose
It looks like that running encrypted freebsd on rpi4 on separately ssd disk is not easy so maybe the whole idea is wrong.
Thank you for advices
#freebsd #raspberry #dataownership

2025-03-27 13:45:19 UTC

Did you see anytime different patch number when you run uname -a or freebsd-version?
It is not wrong because not all patches are applied to kernel or to userland. uname shows kernel patch.
check results of commands below:
$ freebsd-version -r (for kernel patch number)
$ freebsd-version -u (for userland patch number)
Honestly little bit confusing, but maybe because I do not understand details.
#freebsd #patch #versions

2025-02-11 20:55:56 UTC

- reply

@nprofile…sr9k Personally I love honest and objective talk, dislike overhype and so on. I like your communication you are one of many why I so like bsd community despite my technical skill is not enough to understand everything, even though Florence would not happen by your expectations your longterm benefits to community is invaluable

2025-02-11 20:01:21 UTC

- reply

@nprofile…sr9k I wish you! Take care! Can I help somehow?

2024-12-08 17:04:55 UTC

- reply

@nprofile…ehlq @nprofile…xcze here i found a comment where the author thinks that port=0 disabling dns https://forums.freebsd.org/threads/vm-bhyve-dnsmasq.83047/#post-543619

2024-12-08 16:05:42 UTC

- reply

@nprofile…ehlq @nprofile…xcze So I am tweaking dnsmasq configuration and I have this result, I can ping 1.1.1.1 or 8.8.8.8 without a problem but google.com I can not. I found out that it caused by option port=0, when I ve deleted the line, domains works like a charm, so it seems that you have a mistake in your post, port=0 should not be in config. And I found abother problem, VM network dont want to work if I have not option domain-needed in config, so this option maybe missing in your post config. Currently everything works 🥳

2024-12-08 13:57:58 UTC

- reply

@nprofile…ehlq @nprofile…xcze I ll check again to be sure and let you know, I ll try ping IPes..

2024-12-08 12:39:31 UTC

- reply

@nprofile…ehlq @nprofile…xcze in /usr/local/etc/dnsmasq.conf same as in your post

2024-12-08 12:38:40 UTC

- reply

@nprofile…ehlq @nprofile…xcze yes

2024-12-08 08:42:41 UTC

- reply

@nprofile…xcze @nprofile…ehlq then it is a strange more because I am using dnsmasq and my vm got ip address from set range in dnsmasq config, but I had to edit resolv anyway

2024-12-07 23:12:47 UTC

Finally run debian12 with gui thanks to vm-bhyve on freebsd14 after several month of tweaking and learning. Really big thank to @nprofile…ehlq and his article https://vermaden.wordpress.com/2023/08/18/freebsd-bhyve-virtualization/ ❤️
But one thing I still dont get it. I have a problem with resolving a DNS on the VM. IP addreses works well but domain names like google.com not at all. I solved it by adding "nameserver 8.8.8.8" in /etc/resolv.conf in VM, but I am not sure if I solve it well and dont understabd why I have to solve it anyway, I do not remeber that I would have to set it.
I se vm-bhyve with host wifi wlan interface so I had to set NAT in PF, in article it is a section laptop wifi nat. Is it normal to set resolv.conf file in VM?
#freebsd #bhyve #debian #nat #pf #virtualization