Hypnotize Feminists

I took a pre-employment screening test once that said I wasn't suited to be a wind turbine technician, but would be better as a salesman. I've always been curious about that and how well I fare as a car salesman or something.

2026-06-29 05:38:16 UTC

Had a retarded deer hit the truck earlier. I was driving next to a wheat field at around 40 mph with the family when it happened. We had gone out for a little drive to watch the fireflies and the deer must have been laying down in the ditch and at the last second it got up and ran smack onto my driver's side door. It spun around and hit my rear door before bouncing off onto the road and running away. Had my arm dangling out the window to enjoy the cool night air and it smacked right into my forearm and elbow, but it didn't even leave a bruise. No idea what the repair bill is going to be. Both doors are dented up, not too bad but definitely noticeable. My window still works but I can hear it clunking whenever I roll it up or down.

2026-06-27 12:53:15 UTC

- reply

@nprofile…46wa true except I would never say that about Ann Landers because I find her delightful and witty.

2026-06-27 03:02:03 UTC

There's a yard waste dump a few miles from my house and the majority of my firewood comes from people dumping their trees there. Unfortunately the Dump Master loves to burn anything they throw in there within 24 hours of delivery, so I've watched a lot of really excellent wood go up in smoke because I couldn't get to it in time. I went yesterday and had an entire truckload cut up in about an hour. I was going to go back for a second load but it was getting late. Naturally, he had it blazing at 6:30 this morning. I was a little disappointed but it was hedge so not a huge loss I suppose.

2026-06-27 02:56:54 UTC

My anniversary is coming up and I'm going to try to forge an herb chopper for my wife. Hoping I can get it done tomorrow morning.

2026-06-14 02:56:35 UTC

Finally convinced mom that the oil change place was too expensive and she should just let me do it.
Hey chatgpt, what filter do I need for this vehicle?
"You need ABC1234"
Hmm I'll double check the book to make sure.
Hey chatgpt, the book says it's actually XYZ4321.
"Good catch!"
Dang, can't even trust this clanker for a simple parts lookup.

2026-06-14 01:57:32 UTC

Did a little forge work today. I wasn't planning on making a hook, but my son wanted to forge a spear point so I showed him how. It just so happens that a spear point is made very similar to how one would forge a leaf. I used a railroad spike with the head cut off so I wasn't wasting good steel. Since I didn't need a mild steel spear point, I finished making it into a leaf and drew out the rest of the spike into a hook.
https://s3.clubcyberia.co/pleroma/69/c6/2a/69c62a26fa464d440be97240d17eb309546f6d3d8eb27cdd2819b390318c066c.jpg

2026-06-12 21:28:28 UTC

Imagine forgetting your gun at home. Cringe.

2026-06-09 13:17:58 UTC

I rescued a bird from the cat last night. It was bloody but alert. I wonder if it survived.

2026-06-08 00:35:51 UTC

The swim was very pleasant, thank you for asking.

2026-06-07 19:41:33 UTC

- reply

@nprofile…ecqs mostly church actually.
I think everyone just needed a little something to eat.

2026-06-07 19:06:21 UTC

- reply

@nprofile…ecqs both today!

2026-06-07 18:13:44 UTC

Everyone needs to just tone down the crying ok

2026-06-07 01:47:21 UTC

- reply

@nprofile…ecqs what are you going to be making in your workshop?

2026-06-07 01:05:59 UTC

- reply

@nprofile…ecqs oh wow that's nice! One of my blacksmith friends has a Baldor that looks just like that. The bearings are so nice it'll spin for a few minutes after it's been turned off. I've never heard of a Cincinnati before. Please tell me you have this up and running?

2026-06-06 23:42:38 UTC

Found a dead possum in the yard. No clue what killed it. Press F to pay your respects.
https://s3.clubcyberia.co/pleroma/91/19/24/91192409db34d7762ec8539934f93d6c60db7991d49fed594e9f3a3736d20cef.jpg

2026-06-06 21:59:25 UTC

- reply

Oh nice, it's an American made Westinghouse.
https://s3.clubcyberia.co/pleroma/91/75/1c/91751c5379e22972eb5a97ae322e3860f5c01e10bf02abd5845c45511fd5b4be.jpg

2026-06-06 21:51:19 UTC

I picked up an old bench grinder for $5 at a yard sale. Not sure how old it is but it has no on/off switch, and an unpolarized plug. Since there are no guards in hoping to change everything out to buffing wheels and use it for fine honing of edged tools.

2026-05-30 15:25:47 UTC

Got a lot to do today.
https://s3.clubcyberia.co/pleroma/81/15/9b/81159b5924163b60077cb8a41ed27caa4c4db062ee093056633da33cb3e33f25.png

2026-05-30 14:05:08 UTC

Man my feet stink. It's probably time to throw these boots into a volcano.

2026-05-30 03:12:32 UTC

- reply

@nprofile…h5wj that sounds like a fun lesson. I once saw a guy walk up to a gas station with a milk jug and fill it with gas and walk off. Not sure if he made it home or not.
I like to keep a lot of gas on hand for the generator. I figure it's good to have about a weeks supply of gas available just in case, and this'll bring me up to 21.5 gallons of capacity, not including the 6.5 gallon tank on the generator itself.
I only keep about a gallon of two stroke handy and a few gallons of kerosene for the salandader and the old railroad lanterns.

2026-05-30 03:00:42 UTC

- reply

@nprofile…h5wj @nprofile…ujhs restoring the can to its original appearance would be nice if I had more time on my hands, but as long as it doesn't leak it'll go into service as is.
Last year I got another Eagle can when a friend's grandma died and he didn't want anything out of the garage. Someone had painted it black. It's a little fancier than the one I just got.
https://s3.clubcyberia.co/pleroma/41/3a/91/413a91e4aa0b85e89f13125b1f7604ba82e1ee6cffa95df11286a7f1c4c21157.jpg

2026-05-29 23:57:53 UTC

I picked up this old Eagle metal gas can earlier. A lady my mom knows likes to junk and scrap for extra money, and she sets aside good forging metal to sell me. I was over there picking up some bar stock and she didn't know what it was. Some farmer cleaned out a barn and got rid of it as scrap. The inside looked pristine so I offered her $20, which I thought was very fair.
https://s3.clubcyberia.co/pleroma/f8/f2/03/f8f2039dd7d2a6e7bf6bd8e101c095758f9b0b31a1dac0ace3f16b7bf8d05276.jpg

2026-05-27 03:57:53 UTC

Broke the deck belt on my lawnmower earlier today while I was mowing the hayfield (my overgrown backyard). I was almost shocked that I found a replacement at the local useless farm store and didn't have to order a new one online.

2026-05-19 22:50:11 UTC

Tried some tinned fish the other day. It sucked, but I'll do it again.

2026-05-19 22:48:10 UTC

I think the word has gotten out that we feed stray cats because two more have shown up in the last week.

2026-04-29 04:02:56 UTC

I have never tried rabbit actually.

2026-04-29 02:27:15 UTC

Finally got the yard mowed today and I found a rabbit's nesting scrape with four little bunnies inside. I mowed around it of course but I do wish it wasn't so near the road so I could maintain a proper yardcuck façade without the circle of foot long grass.
https://s3.clubcyberia.co/pleroma/58/44/14/584414cb09c6601d8984c76bfd316638a8e197e64e1374a55d46bb9b73ffd2d7.png

2026-04-26 12:38:40 UTC

Camped out last night. What a great sleep. Coziness 10/10

2026-04-23 03:27:33 UTC

- reply

@nprofile…h5wj @nprofile…a4lr
>"planting potatoes isn't worth my time"
https://s3.clubcyberia.co/pleroma/a8/ae/4e/a8ae4ee949ab79d6e692828e9b159727bd6263ec5596e71963ee52af1643d648.jpg

2026-04-23 03:14:39 UTC

Kind of digging these stealth camper fellows.

2026-04-23 03:02:54 UTC

- reply

@nprofile…h5wj taters n onions

2026-04-23 02:05:18 UTC

A new cat has appeared.

2026-04-20 03:09:22 UTC

Seems like the era of buffets is coming to a close.
Hiring a mix of negroes and necktat white women probably wasn't a good business decision.

2026-04-20 02:59:31 UTC

I've been reading a lot lately from my old first generation nook. The original battery had died and I let it sit for several years before ordering a replacement. Unfortunately all the books I'd had on it disappeared and B&N no longer supports the original generation nooks. I loaded it up with pdf books from Gutenberg but I really miss the massive collection of classics in epub format I had accrued over the years.

2026-04-20 02:47:49 UTC

Sometimes the kids ask for a no electricity night so they can hear the house as quiet as possible. I thought it was an odd request at first but I've really come to enjoy sitting in silence on the porch with the family and only a few candles burning. It's really easy to ignore the background noise all the appliances make but going and throwing the main breaker really feels liberating from the matrix.

2026-03-31 19:01:38 UTC

Speaking of criminals, I wonder what Todd Kincannon is doing these days.

2026-03-30 01:13:37 UTC

The chicken in question died during a particularly severe cold snap and the ground was frozen solid. I ended up making a bonfire for a about two hours in order to thaw the ground out enough to dig a grave. My wife asked me why I didn't just leave it out in the field to let nature take its course, but this hen was one of The Originals from 2020 so I felt she deserved a proper Christian burial.

2026-03-28 00:30:52 UTC

- reply

@nprofile…x4c6 which ones?

2026-03-20 14:43:21 UTC

- reply

@nprofile…caqd he has gone to the Lord.

2026-03-20 14:22:02 UTC

F
https://s3.clubcyberia.co/pleroma/e3/42/24/e342246b875fce8bfb7284f95eb055ab3ab0282a59e8976b7c7d81d2fd3f531f.jpg

2026-02-26 23:49:20 UTC

Nineteen dozen eggs available if you're hungry.

2026-02-26 23:48:30 UTC

Years ago an older gentleman told me I needed to put more artistry into my forgings. I scoffed at that suggestion at the time because I was only interested in the most basic and utilitarian items. Now I find my self agreeing with him more and more.
https://s3.clubcyberia.co/pleroma/46/11/e0/4611e0198d91e35aa46ce9dc44e5d4f617840b35abe88bc7962aa06fc5a10849.mp4

2026-02-26 19:32:39 UTC

- reply

@nprofile…x4c6 I'm glad I'm not the only one who does this.

2026-02-26 19:19:06 UTC

- reply

@nprofile…9z4u my mom always gives me dire warnings too whenever there's snow, but generally no offer of how to get rid of it otherwise. In a way I'm glad my pneumonia experience last year was bad enough to give me an abnormal heart rhythm, it triggered enough testing that now I know I have clear arteries in my heart.

2026-02-26 19:16:45 UTC

- reply

@nprofile…9z4u Fred Moore would approve this post.

2026-02-24 15:18:22 UTC

- reply

@nprofile…9z4u please be careful I know you are approaching 30 so you need to start being concerned about your heart exploding during strenuous activities.

2026-02-23 13:40:06 UTC

I'm glad I overdressed for winter camping. I saw a lot of people who only wore jeans and sneakers with a t shirt and thin coat to keep themselves warm. I loaned out several pairs of gloves and a few spare balaclavas. The boy and I were nice and toasty in the tent even town into the teens, but people who thought their 0° sleeping bag alone was sufficient ended up shivering all night.

2026-02-20 05:12:21 UTC

Why indeed Mr Reilly
https://s3.clubcyberia.co/pleroma/b0/fb/98/b0fb981cdbf47419717d4cfff5c04c088848af4bf4b4325ba8a76691bb8b4055.png

2026-02-20 05:10:35 UTC

TDR4EVR
https://s3.clubcyberia.co/pleroma/24/ed/e5/24ede57939e6f7b72970c505f9b6e5e7c9cfe1288b793f3932e71e159f38e646.png

2026-02-20 04:50:27 UTC

- reply

@nprofile…9z4u No, which I don't blame him for really (assuming its true) because I remember a guy posted doing something similar and I think they charged him with something pretty serious. Since a wind farm is technically a power plant doing any serious damage is investigated by DHS. At least to my understanding. But otherwise yeah no cameras or anything. I've heard of towers that have sensors on the inside hatches, so if you climb it without shutting it down properly whoever is monitoring SCADA will figure it out real quick. But for the most part its on the honor system.

2026-02-20 04:26:37 UTC

- reply

@nprofile…9z4u A guy on Gab once told me he smashed the lock on a turbine door and climbed up it so he could base jump. Not sure if he was telling the truth but if you ever want to give it a try there's only a padlock between you and the top.

2026-02-20 04:16:25 UTC

Old one.
https://s3.clubcyberia.co/pleroma/9a/45/2b/9a452b9b401da51573074f08247fad201b21a6de0c3ff8259ae912ab173ebf65.jpg

2026-02-19 20:27:15 UTC

- reply

@nprofile…36vj my light shineth in the darkness, and the darkness shall not overcome me.

2026-02-19 17:15:02 UTC

Can't blame Iggy for that. I wish there were more nice seafood restaurants around me (Long John Silvers).

2026-02-19 17:13:11 UTC

There is nothing interesting left to see on the internet.

2026-02-09 04:25:28 UTC

We quit our church last year when they replaced our pastor with a female. The new place is ok... the sermons are biblically accurate I suppose. But the new guy has a tendency to weep while he preaches and it
feels like I'm in the same boat as before.

2026-02-08 03:27:00 UTC

You guys might not like it, but this is what peak female physique looks like.
https://s3.clubcyberia.co/pleroma/9a/f4/01/9af4016a81e360ac9a0c8d4638faab6550108ec303d0270bbe9c77ca166e3a4e.png

2026-02-08 03:21:18 UTC

- reply

@nprofile…9z4u has it been that long now? I remember he had some legal problems but never knew what happened because I didn't ask him. I know trials can sometimes take years, so when his behavior became increasingly erratic I assumed it had gone to trial and didn't go in his favor. Then he disappeared and I assumed he'd been sentenced. I always enjoyed his banter and considered it a shame he went crazy(er) and threatened to kill me.

2026-02-08 03:12:46 UTC

- reply

@nprofile…9z4u he was?

2026-02-08 03:09:28 UTC

Is folk still in jail?

2026-02-08 02:36:36 UTC

Everyone glued to their phones but you @ the group text wanting to make plans and it's crickets.

2026-02-06 02:58:32 UTC

- reply

@nprofile…x4c6 find a song about a dog being torn apart by a toddler to counteract it.

2026-02-03 03:54:39 UTC

- reply

@nprofile…9z4u you see, the Lord works in mysterious ways.
I actually had a followup appointment today and the pulmonologist showed me my CT scan for the first time. He told me half my left lung had collapsed, which I didn't realize. It was pretty nifty seeing the fluid filled void and the odd impression my crushed lung material made.

2025-07-03 03:56:03 UTC

I played a teens vs dads soccer game the other day. Although I maintain that soccer is gay, I'm proud to say we crushed them despite our aching joints.

2025-07-03 03:48:21 UTC

My church is getting a she-pastor, time to find another pew to sit in.

2025-07-03 03:38:53 UTC

A recent forging project: a coffee (or anything really) scoop. Volume is one tablespoon. I made one of these awhile back but it was longer than I thought necessary. This one is much shorter. Perhaps shorter than I'd like, but that is fine.
Rather than smooth out the forging marks, I left it a little rough and twisted it in the vise before bending so the hammer marks and irregularities would more closely resemble a natural vine for the leaf. I was pleased with the results.
This took several hours to make as the transition between the leaf and vine is so thin and fragile.
https://s3.clubcyberia.co/pleroma/fa/6c/7f/fa6c7f84f644f66241afca542df065fa80388749b57e6df033aaa8be73dfdccc.jpg

2025-04-09 03:05:28 UTC

Did Ignatius disappear for good?

2024-08-25 11:44:13 UTC

- reply

@npub1u3s…xqgv @npub1a4r…cn7g
Soon we will be unstoppable.

2024-06-18 04:40:40 UTC

You might remember me posting this shovel I made a few months back. Last weekend I forged a fire poker to match it. I'm going to submit them to the metalworking classification in a local art show. The grand prize is $3, so wish me luck.
https://media.clubcyberia.co/pleroma/1feb917ad0110f565b9b0f06201cecbaf4b88b941e0135ec3afd414300364a41.jpg

2023-10-29 21:59:31 UTC

I saw a kitten today. What's your good news?
https://media.clubcyberia.co/pleroma/3529847c6b1f8a675c4b6b125cee6c422509ab788e7f38f9d59add2a4be0eb92.jpg

2023-10-25 23:50:11 UTC

This was the last time Ignatius posted his nails.
https://media.clubcyberia.co/pleroma/4d2a3bf04ba9fa11eaa915bea59b857d43643458f36dc4a53c070619b4ae27d3.jpg

2023-10-11 02:14:20 UTC

My nephew's knife is now mostly done as well. As I mentioned earlier, even an HC spike doesn't have enough carbon in it to make a good knife, but I went ahead and quenched and tempered (to straw) just to make the most out of what carbon it does have.
The tip and a few inches behind that are razor sharp and will shave hair, but the part of the blade closest to the handle isn't quite there yet, so I'll work on it some more tomorrow. I'm going to leave the oil finish on but I may draw file more of a polished surface on the business end of the blade for aesthetics.
Shown is the parent material and the (mostly) finished blade.
https://media.clubcyberia.co/pleroma/de696712d8e9d856c12ecd29db956e0fb988bbaa29b7fb601bba2250d2365fe1.jpg

2023-10-10 03:05:40 UTC

I got some forging done today on my paid holiday off work to honor ol' Chris. My main project was to forge a knife for my nephew, whose birthday is coming up soon and I feel it is time for him to learn how to kill a man with a blade.
As a side project I also finished the forging on the feather hook I began a few weeks ago. Now all that is left is to file off the rough edges and then apply a finish.
I'm only somewhat satisfied with this hook. The hook itself is a little rough, so I'll need to do a lot of file work to get it looking acceptable. In the video I watched the smith cut some gaps into the vanes to make it look more realistic, but perhaps my hot chisels are too wide because I don't really think it looked that nice. His looked natural, mine just looked like nicks in the metal.
That being said it's perfectly functional and will be a welcome addition in the coop, where I need more hooks anyway.
https://media.clubcyberia.co/pleroma/b6782e915b07166c771feac1dbba8837a6de290aac23364d682cf56b73616b7e.jpg

2023-10-03 04:00:54 UTC

- reply

@npub1gnr…skrr did you manage to return fire?

2023-10-02 17:01:42 UTC

fr yt ppl
https://media.clubcyberia.co/pleroma/e48b56643b8c8d092ab8c61b9a429adade977c493d533b0924ddb71e29ec80aa.jpg

2023-09-30 02:57:37 UTC

- reply

@npub1snh…ywgf "Young man, the giant iron phallus on your anvil was NOT an invitation... now go get that trad girl pregnant"

2023-09-30 02:48:57 UTC

- reply

@npub1snh…ywgf no one who blacksmiths could be a homo, it's impossible

2023-09-30 02:42:54 UTC

Speaking of which, we've got a guy in our group that's 15 or so, and he was out demonstrating with us as well. Some girl about his age (who was a demonstrator for a sewing exhibit) came early in the morning, plunked herself down on a bench in front of this kid, then literally did not move for the next two and a half hours until lunch. Just watching him work.
While we were eating I asked him if that was his girlfriend, but he said he didn't know her. I told him if he didn't have a girlfriend (and he doesn't), he's got an applicant right in front of him. She came back after lunch and literally just stared at him for the next two hours. When the demonstration was over he left to go wash his hands and she followed him out, but then he ducked back in because he "forgot something."
I just don't understand boys these days.

2023-09-25 00:45:33 UTC

Well that's a hard fail.
https://media.clubcyberia.co/pleroma/c5475d62ba5b9d1c54fe0eb87fdf87b19999d94bce53cba2a2382f0e1abb1b1f.jpg

2023-09-22 21:52:03 UTC

- reply

Here is the feather hook I'm making for my chicken coop. I didn't get finished before I ran out of time. I used an old piece of 1"×1" angle iron I found mangled in a ditch. I think it had been a marker of some sort and got hit with a tractor mower. Angle iron makes a nice feather shape because when you pound it flat the center ridge looks like the rachis. I used a hot cut chisel instead of an angle grinder so it took longer to make, and that's why I didn't finish. You can see where I used the new fullering chisel to begin marking the vanes. Then I'll smooth out the hook section and bend it to shape. I'd like to make a few of these for the coop, and maybe a few for my brother for Christmas, since he raises chickens as well.
https://media.clubcyberia.co/pleroma/c8d366acac3e0a32348d8ee30c1e85371afe90381c83b32fe7da4c165b07742c.jpg

2023-09-22 21:45:36 UTC

I also needed to make a tool. I'm wanting to make some feather style j hooks for the chicken coop but all I have now are either cold cut chisels or hot cut chisels. I needed something that was essentially a hot cut chisel that was rounded over to act as a very thin fuller. Something that would make thin lines but without cutting into the material too much. I've been wanting to use some of these new style railroad keeper springs for a while. It occurred to me that rather than using coil spring these are already flat and in a chisel shape and don't really need much drawing out at the end. Plus the extra mass and length will be more ergonomic. You essentially have a ready-made chisel just waiting to be straightened out. The only problem I ran into was the fact that the material is so big none of my tongs really held it very comfortably and it had a tendency to bounce around. That's why it looks a little rougher than what I would have liked. Even though it's just a tool I would have preferred to get it smoother but with no good way to hold it well I decided it was good enough. I'm definitely impressed with the shape and mass. Shown are the tool and parent stock, plus in my hand for size reference.
https://media.clubcyberia.co/pleroma/42bfa6c5979cd00c7d93702c9c3fa2a82ff15209b9e2e441902bf5300f01a2d2.jpg
https://media.clubcyberia.co/pleroma/aada7661c6801ad941e502f069090ebc52f04ea8457ce607f11219d48951a0d5.jpg

2023-09-20 02:51:09 UTC

- reply

@npub17se…544t are they finally staging your intervention?

2023-09-17 04:59:09 UTC

- reply

@npub106d…3m89 I was watching a video the other day about (iirc) some 15 yo kid who didn't clip his toenails for over a year - since the last time the dermatologist clipped them.
How does a 15 yo not have this basic hygiene skills mastered? He didn't appear retarded...

2023-09-15 03:43:31 UTC

- reply

@npub19w2…rr2f @npub1scj…el3p she's probably one of the people I'm seeing in the comment sections then.

2023-09-15 03:41:15 UTC

- reply

@npub19w2…rr2f @npub1scj…el3p that's good, the more time I spend on normie social media the more I see just what garbage human beings most Atheists are.

2023-09-15 03:13:33 UTC

- reply

@npub19w2…rr2f my thoughts and prayers are with your family.

2023-09-14 23:07:01 UTC

Took my daughter to a park earlier and there was another little girl there who was maybe 8-9. I heard her telling some older kids that she was both gay and a furry.
My daily reminder to keep the kids homeschooled.

2023-09-14 12:50:03 UTC

The tadpoles are turning into little baby froggies and leaving the pool.
https://media.clubcyberia.co/pleroma/b410364b58455d762ef592370637b47f1e86e68e78bb760554504923cfdf09f2.jpg
https://media.clubcyberia.co/pleroma/8c3aa11e69bc693e777d7e42781ad1578405dd242e2db3284cb08c27d1a0d2aa.jpg

2023-09-13 20:11:53 UTC

- reply

@npub106d…3m89 @npub1u83…r2s5 @npub1v7t…ck6k heck, since her rings are so small do you think holding them over a candle for a while would do the trick? It also occurs to me that with them being such a small size that annealing might be difficult because they'll still lose heat so quickly, even packed in vermiculite or sand.

2023-09-13 18:21:53 UTC

- reply

@npub106d…3m89 @npub1u83…r2s5 @npub1v7t…ck6k I use vermiculite from the garden center for annealing. Very cheap and much easier to move around than a 5 gallon bucket of sand.

2023-09-12 05:33:17 UTC

- reply

@npub19w2…rr2f yeah I guess I could

2023-09-12 04:47:35 UTC

Not that I'd ever spend the money, but I wonder how much a basic setup would be to start my own ASMR channel.

2023-09-09 03:20:02 UTC

- reply

@npub1z06…y3q9 I honestly don't care what system the Eurofags use. I think whatever you're raised with will probably become the easiest in your mind. But I think Americans simping for metric are only doing so for virtue signal points.

2023-09-09 03:06:25 UTC

I get that Europeans like it because they're faggots, but when an American says they want to switch to metric it seems like such a betrayal.