npub1yrlmnr0y2ch5ycn38j2navyduf5q6tqyd0led3p7xhwmzwcrlsaq558gpm (npub1yrl…8gpm) npub12atwfrq4rfv7fqara6gzsgrgj7k8ngewzl5nzs46agwyxzh0e25qxlme5y (npub12at…me5y) It uses the SY8368QNC which is limited to 8A continuous, 16A peak, to supply the 5V rail, but I doubt that the traces on the board are meant for 8A draw; a schematic won't tell you that. Max for any individual pin for the headers they have is typically 1-3A depending on the wires you are using, I think, as well as the thickness and width of the traces in the PCB.
So the biggest unknown is the PCB traces.
But note that it has 6 separate PCM ports for fans, which you really want to use because they have flyback diodes to keep back-EMF from the fans from damaging the board. Inductive loads are not friendly with logic. 😀
So it's not just a question of current capacity, but also of the load characteristics you have in mind.
Sorry, no easy answer here!
npub1dp…ar4y2
2024-02-02 21:57:59
in reply to nevent1q…fd0z
Author Public Key
npub1dpkxnjquw36ngs79dv94aap4ede5dz7h29pmz94kn5fjgfj5pnqq8ar4y2Published at
2024-02-02 21:57:59Event JSON
{
"id": "626021bad4fc2dd2d4b1fed8131f3b60ff011ca014dd91294b4d651e59842365",
"pubkey": "686c69c81c74753443c56b0b5ef435cb73468bd75143b116b69d132426540cc0",
"created_at": 1706911079,
"kind": 1,
"tags": [
[
"p",
"20ffb98de4562f4262713c953eb08de2680d2c046bff96c43e35ddb13b03fc3a",
"wss://relay.mostr.pub"
],
[
"p",
"5756e48c151a59e483a3ee9028206897ac79a32e17e93142baea1c430aefcaa8",
"wss://relay.mostr.pub"
],
[
"p",
"ea01c28d25fdebef270fb11977d88794eaa6e04210af4e9f0d45d2ca4df3e28e",
"wss://relay.mostr.pub"
],
[
"p",
"02a0f2cd76233181ace57dc1bcc8c69d14efd1b973613d49e6e28b2cb89aee30",
"wss://relay.mostr.pub"
],
[
"e",
"44c3c3f056485632633923504ab023335bbdaa7ec215638e2b4e91533d0a9d31",
"wss://relay.mostr.pub",
"reply"
],
[
"proxy",
"https://social.makerforums.info/users/mcdanlj/statuses/111864124501333841",
"activitypub"
]
],
"content": "nostr:npub1yrlmnr0y2ch5ycn38j2navyduf5q6tqyd0led3p7xhwmzwcrlsaq558gpm nostr:npub12atwfrq4rfv7fqara6gzsgrgj7k8ngewzl5nzs46agwyxzh0e25qxlme5y It uses the SY8368QNC which is limited to 8A continuous, 16A peak, to supply the 5V rail, but I doubt that the traces on the board are meant for 8A draw; a schematic won't tell you that. Max for any individual pin for the headers they have is typically 1-3A depending on the wires you are using, I think, as well as the thickness and width of the traces in the PCB.\n\nSo the biggest unknown is the PCB traces.\n\nBut note that it has 6 separate PCM ports for fans, which you really want to use because they have flyback diodes to keep back-EMF from the fans from damaging the board. Inductive loads are not friendly with logic. 😀\n\nSo it's not just a question of current capacity, but also of the load characteristics you have in mind.\n\nSorry, no easy answer here!",
"sig": "51098f9a919bf5b566a5b24363c6ad7c3dc0fa19ae0cb3fd197fb3efc3184907e22af8be1c92de9dbf2db540aefd23696affe7591a97dfe1ebd89f041e31cbc6"
}