inkan on Nostr: Also if you'd ever like to take a closer look, please feel free to log in and poke ...

Also if you'd ever like to take a closer look, please feel free to log in and poke around. I've put your pubkey on the allow list for the identity features, so you should be able to access these. For an initial "tour guide" please see below:

quoting
nevent1q…lh57

Thanks, I put your pubkey on the allow list. Here's a quick initial tour:

1. Log in with NIP-7 (e.g. nos2x etc.).

2. Do a quick check that you are connected to the backend. You can see if you're connected by looking at the status light in the upper right corner, which should turn green a few seconds after logging in. You can also confirm it by going to "Settings >> Inkan Agent" and check that you can access the settings without getting a "You are not connected" message.

3. Then go to the profile page of the following pubkey (it's one of the permanent identities):

7f2c82d6cc1b2d500071a9d426e6c9873ae51a9a774e52ee61b180e49bfa6fec

4. Look at the notes appearing on that pubkey's profile page. You'll see green "D"s on the avatars. Click on these green "D"s and read the explanations. Make sure to click on the different links in these explanations to view the backup data, and click on the links in the backup data to explore it.

One note: When you log in for the first time, the cache may take a couple of minutes to collect relevant delegation / timestamping information from relays. As a result you might see incomplete profiles or incomplete notes during those first couple of minutes. Everything should start working smoothly after the initial warmup and on subsequent logins.

See if you get a sense of what's going on. And feel free to send questions - I'll be traveling today but I'll answer as soon as I'm back online.