mrecheese 🧀 on Nostr: Prusa Mini with a 0.6 nozzle does not work well at all with Prusaslicer Arachne ...
Prusa Mini with a 0.6 nozzle does not work well at all with Prusaslicer Arachne perimeter generator. It does weird things like dropping random perimeters in the middle of nowhere, which leaves holes in the print at the seams. With a 0.4 it works fine, though. 🤔
#3dprinting
Published at
2026-03-19 19:39:33 UTCEvent JSON
{
"id": "5e7b924f961aa8ae82aabfb58f450c10aeaed33d33726f813ec1fcfbfff0b9b8",
"pubkey": "d8f38b894b42f7008305cebf17b48925654f22b180c5861b81141f80ccf72848",
"created_at": 1773949173,
"kind": 1,
"tags": [
[
"alt",
"A short note: Prusa Mini with a 0.6 nozzle does not work well at..."
],
[
"t",
"3dprinting"
]
],
"content": "Prusa Mini with a 0.6 nozzle does not work well at all with Prusaslicer Arachne perimeter generator. It does weird things like dropping random perimeters in the middle of nowhere, which leaves holes in the print at the seams. With a 0.4 it works fine, though. 🤔 \n\n#3dprinting",
"sig": "632b991d69386d1bd51c6a6e6e6a2f6af534340f04dace8276aebc0d3ce95b5e4251ed92384a3e0927096fe3216711f9469128966f2b70b3f99148713f8814e2"
}
