Nostr notes by Dr H

You're just showing off now. 😄

2024-12-04T19:35:58Z

In reply to nevent1q…uzld
_________________________

You're just showing off now. 😄

Ah, so there is a salute. Oh well, another good moment for the ...

2024-12-04T18:10:01Z

In reply to nevent1q…x6ww
_________________________

Ah, so there is a salute. Oh well, another good moment for the facepalm... 🤦

Thanks again. Good to hear you're not bored of my re-sharing ...

2024-12-04T17:03:59Z

In reply to nevent1q…uwnw
_________________________

Thanks again. Good to hear you're not bored of my re-sharing all the time.

Thanks. I've not managed much "new" for a while. But ...

2024-12-04T15:49:04Z

In reply to nevent1q…akka
_________________________

Thanks. I've not managed much "new" for a while. But there are more angles of past projects, as yet unseen on WH.Soc.

Though, on a new server, I'll have to start all over again with that. So expect repeats (it's not so bad seeing something good again...).

My spreadsheet of "what I've shared to SM" will have to get more complicated too.

Such is life.

I'd salute you all, Warhammer.Social, if I'd ever painted ...

2024-12-04T13:48:17Z

I'd salute you all, Warhammer.Social, if I'd ever painted a model of someone saluting.

Thank you all, especially Ianob, for a great start on this Mastodon.

Hopefully we'll bump into each other elsewhere, when we find new homes on new servers.

I'll be sure to update when I've got an account set up elsewhere.

Here's a facepalm emoji in lieu of salute🤦‍♂️

To all my other followers that continued to read; Normal service shall resume soonish from another server once everything migrates.

The fifth Plague Marine of the squad. Added tentacles and placed ...

2024-12-03T18:38:27Z

In reply to nevent1q…jrxk
_________________________

The fifth Plague Marine of the squad.

Added tentacles and placed the sword to be poking through his cloak as if that's the reason for the hole.

#Warhammer40k
#Nurgle
#PlagueMarines
#Deathguard
#MiniaturePainting

Settlement tour of my Oberland station build in Fallout 4. This ...

2024-11-30T18:27:50Z

Settlement tour of my Oberland station build in Fallout 4.

This build came from a set of blocks I found from one of the mods I use, and I decided to build a castle-like structure.

With the ground geometry, I was even able to add a secret room within.

📽️ ~ 13 mins

#Fallout #Fallout4 #SettlementBuild

https://youtu.be/7F9JPSfoXfs

Behind the broken barricade at this broken statue a grim tale ...

2024-11-21T17:24:16Z

In reply to nevent1q…4p49
_________________________

Behind the broken barricade at this broken statue a grim tale emerges:

A campsite with teapot on a burner, ammo boxes, storage, drinks bottles, and mugs lay discarded and covered with blood.

What happened?
Settling down for a brew, admiring the tally carved into the statue's shoulder, then the barricade broke...

But no bodies remain, alive or dead? Where did they go?

#Warhammer40k
#WarhammerCommunity
#TabletopTerrain
#Statue #BrokenStatue

Poxwalkers #7 (Vanilla) and #17 (Converted). In addition to the ...

2024-11-20T17:59:53Z

In reply to nevent1q…nvtf
_________________________

Poxwalkers #7 (Vanilla) and #17 (Converted).

In addition to the weapon and arm swaps, I also gave this one an evil purple tentacle, just because.

#Warhammer40k
#WarhammerCommunity
#MiniaturePainting
#Nurgle
#PoxWalkers

Keyring, made from scratch, to replace a previous keyring that ...

2024-11-13T17:43:13Z

Keyring, made from scratch, to replace a previous keyring that all the paint chipped off.

To prevent paint chipping from this one, I embedded the only paint in an insert that is covered with clear plastic. the outside is plain MDF and some milliput to fix the ring in a slot.

I chose a Torii gate for the subject as they are described as "the transition from the mundane to the sacred", so what better for a keyring that carries keys to open the way...

#Painting #ToriiGate #ToriiGateKeyring

Settlement tour of my Coastal Cottage build in Fallout 4. Not ...

2024-11-07T17:36:24Z

Settlement tour of my Coastal Cottage build in Fallout 4.

Not only did I use many of the usual mods to build this, but I performed much of the building using the Creation Kit as an experiment in modding.

This allowed me access to many items not normally available (even with mods) and the ability to position items "better"(?).

#Fallout #Fallout4 #SettlementTour #SettlementBuild

📽️ ~ 19 mins

https://youtu.be/B_cJmmsO_Zw

More photos of the Grot biker. The base is a sprinkling of ...

2024-11-06T18:19:12Z

In reply to nevent1q…5qku
_________________________

More photos of the Grot biker.

The base is a sprinkling of activated carbon (from a water filter) sanded flat.

I also added a Isle of Man TT poster, because motorbike.

#GrotBiker
#Orks
#Warhammer40k
#WarhammerCommunity
#Motorbike

The powerfist attachment for the left arm of the Chaos ...

2024-11-05T18:05:37Z

In reply to nevent1q…4s44
_________________________

The powerfist attachment for the left arm of the Chaos Dreadnought consists of 5 parts:

The hand (a cast of the right hand with the thumb moved),

Two armour plates (one with a chaos star and the other plain for the extra attachements),

A combi-bolter and,

A heavy flamer.

All magnetised.

#Warhammer40k
#PaintingMiniatures
#Helbrute
#ChaosDreadnought

Thanks, November'.

2024-11-04T19:28:36Z

In reply to nevent1q…3k09
_________________________

Thanks, November'.

I intended it as something alien with those skin tones. But fresh ...

2024-11-01T10:50:54Z

In reply to nevent1q…6waw
_________________________

I intended it as something alien with those skin tones. But fresh meat, yes, it's always on the menu.

More from the Multi-ped Forklift model. The cab has a full ...

2024-10-26T17:09:27Z

In reply to nevent1q…4mha
_________________________

More from the Multi-ped Forklift model.

The cab has a full interior with seat, controls and various monitors.

On the outside I added a few cameras so that the driver can get a better view around the forklift, such as the dome/globe camera right on top of the fork.

#Scratchbuilt
#ScaleModel
#Forklift
#TabletopTerrain

More views of the Messerschmitt bf109 repaired 1:72 model. ...

2024-10-25T16:50:10Z

In reply to nevent1q…juaj
_________________________

More views of the Messerschmitt bf109 repaired 1:72 model.

#ScaleModel
#Bf109
#repair
#Aircraft

My Jack-of-all-Trades run of Baldur's Gate 3 is done. The ...

2024-10-25T13:12:23Z

In reply to nevent1q…f6fn
_________________________

My Jack-of-all-Trades run of Baldur's Gate 3 is done.

The plan was to stay as support and thus the rest of the party had strong builds to carry "Tav".

Final party members:
Normski (Tav) Human - 1 level of every class, Mr Average "my middle name is Abserd".

Shadowheart - Wizard 1 / Cleric 11 (War)
Debuff machine with Rad' Orbs and Reverb'n.

Gale - Wizard 11 (Abjuration) / Sorcerer 1 (Draconic - White)
Party shield.

Jaheira - Paladin 2 (Ancients) / Druid 10 (Spores)

#BaldursGate3 #BG3

The final set of figures that I painted for the Scythe boardgame. ...

2024-10-24T17:05:33Z

In reply to nevent1q…e5lk
_________________________

The final set of figures that I painted for the Scythe boardgame.

From the Nordic Kingdom,
Bjorn and Mox the musk ox.
With the set of blue mechs.

#Scythe
#Boardgame
#MiniaturePainting

Link to the latest(?) one I could find: ...

2024-10-23T19:16:29Z

In reply to nevent1q…7ds8
_________________________

Link to the latest(?) one I could find: https://youtu.be/OskeOonpJZI

I can't comment personally as I'm a diy PC user. But, ...

2024-10-23T19:15:59Z

In reply to nevent1q…emu6
_________________________

I can't comment personally as I'm a diy PC user.
But, Linus Tech Tips do have a recurring series of secret shopper videos for Pre-built PCs: Covering the buying, product, and customer support.

They also use a non-specialist for the contact with the companies, but with commentary from the PC-literate to point out the good and bad.

Only problem is they are Canada-based and focus on USA-ness. But maybe good for getting an idea of what companies and what to look for in said companies.

This is my tour of the settlement I built at Hangman's ...

2024-10-23T17:54:12Z

This is my tour of the settlement I built at Hangman's Alley...

Where I used modded settlement assets to make it not and alley any more.

#Fallout #Fallout4 #SettlementTour

📽️ ~13 mins

https://youtu.be/202aak-ZcdQ

More angles of the Outer Worlds pistol prop replica. #ScaleModel ...

2024-10-21T19:47:31Z

In reply to nevent1q…gs2l
_________________________

More angles of the Outer Worlds pistol prop replica.

#ScaleModel
#PropReplica
#Scratchbuilt
#TheOuterWorlds

Meanwhile, you can watch the tour of my settlement at Tenpines ...

2024-10-16T16:30:31Z

Meanwhile, you can watch the tour of my settlement at Tenpines Bluff.

The first settlement I built with my 2nd character, after the save files for my 1st became too unstable with all the settlement building.

#Fallout #Fallout4 #SettlementBuild

📽️ ~25 mins

https://youtu.be/uuV1TnEj1hs

Thanks Mikko.

2024-10-15T09:50:41Z

In reply to nevent1q…k7jx
_________________________

Thanks Mikko.

Thanks again, Local.

2024-10-11T19:20:57Z

In reply to nevent1q…9ee2
_________________________

Thanks again, Local.

Yep, thanks. Pretty nice kit too.

2024-10-11T16:39:20Z

In reply to nevent1q…336c
_________________________

Yep, thanks. Pretty nice kit too.

I just didn't want the thing to go to waste and I knew it ...

2024-10-09T09:19:30Z

In reply to nevent1q…uh54
_________________________

I just didn't want the thing to go to waste and I knew it would harden... Thanks.

The mound of the hut on mound piece was made from an old ...

2024-10-08T17:17:58Z

In reply to nevent1q…hdv5
_________________________

The mound of the hut on mound piece was made from an old tea-towel that had become soaked in clay (from another project).

Filled with foam off-cuts and left to set it formed the base that the rest of the model was built to match.

I used my usual basing techniques and materials giving areas of rock or mud, then some added plantlife finishes it off.

The steps are made from slabs of dental plaster.

#ScaleModel #Scratchbuilt #TabletopTerrain #HutOnMound

Hmm, what? Well I've built a hut or two before, but using ...

2024-10-06T22:31:40Z

In reply to nevent1q…487d
_________________________

Hmm, what? Well I've built a hut or two before, but using different materials.

Oh, I did produce a tutorial of how I built my sprue hut, yes.

Link, link, link, where's the link... https://ko-fi.com/post/The-Sprue-Hut-Tutorial-Q5Q128W9Y

Some final shots of the Black bear miniature in this diorama. The ...

2024-10-05T17:27:17Z

In reply to nevent1q…uyj3
_________________________

Some final shots of the Black bear miniature in this diorama.

The original miniature is wielding an axe, but it would have looked too large next to the Beorn miniature.
So I removed the head and sculpted a new end and made it look like a length of tree: the same tree that is now a stump on the base.

#MiniaturePainting #Hobbit #LoTR #Beorn #Diorama

Tour of my County Crossing settlement build in Fallout 4. I kept ...

2024-10-04T16:33:00Z

Tour of my County Crossing settlement build in Fallout 4.

I kept this one rough and junky, making use of some vehicles for the perimeter fence, and building up within the destroyed house there to make a shop-front for passing traders.

#Fallout #Fallout4 #SettlementBuild

📽️ ~20 mins

https://youtu.be/PQdkuiAcvgs

Thanks. Always keep a chainsaw handy.

2024-10-03T17:34:00Z

In reply to nevent1q…4wrf
_________________________

Thanks. Always keep a chainsaw handy.

To contrast with the bare interior of the Sprue Hut, I added some ...

2024-10-03T17:30:54Z

In reply to nevent1q…ke48
_________________________

To contrast with the bare interior of the Sprue Hut, I added some flowers around the outside for colour.

Again, made from sprue. This time the flared sprue carving was glued atop a rod.

#ScaleModel #TabletopTerrain #Scratchbuilt #SprueHut

Thanks again.

2024-10-02T19:53:09Z

In reply to nevent1q…xcw9
_________________________

Thanks again.

Thank you, it's sculpted. ...

2024-10-02T19:12:22Z

In reply to nevent1q…k8u0
_________________________

Thank you, it's sculpted.

It was a good'un indeed.

2024-09-25T09:16:54Z

In reply to nevent1q…t6j4
_________________________

It was a good'un indeed.

Yeah, it is likely that I had also seen something similar at some ...

2024-09-25T00:41:34Z

In reply to nevent1q…wawr
_________________________

Yeah, it is likely that I had also seen something similar at some point that led to the inspiration, but I can't remember anything specific. Thanks.

Good to hear you are feeling better, Amanda.

2024-09-24T22:37:40Z

In reply to nevent1q…x6w3
_________________________

Good to hear you are feeling better, Amanda.

Thanks.

2024-09-24T22:33:20Z

In reply to nevent1q…twmp
_________________________

Thanks.

Thanks. It stemmed from trying to find something to do with a few ...

2024-09-24T22:32:57Z

In reply to nevent1q…czw6
_________________________

Thanks. It stemmed from trying to find something to do with a few similar junk items (broken CD player, etc.). Why not build a model on/in one...

More CD city. To complete the story of finding a magical ...

2024-09-24T20:04:08Z

In reply to nevent1q…f02m
_________________________

More CD city.
To complete the story of finding a magical miniature city in a disused trinket, I painted the outside of this CD player grubby and rusty.

#CDCity #Scratchbuilt #Art

Thanks. I enjoy fiddly things (such as model making) for the ...

2024-09-23T18:28:15Z

In reply to nevent1q…a5cu
_________________________

Thanks. I enjoy fiddly things (such as model making) for the challenge.
It just takes a lot of practice to learn the shortcuts and fixes that make the actual making easier in the end. Even now, I rarely cut a straight line, straight. I just know how to account for it and fix it with sanding.

What, more photos of the TOS Star Trek mk2 phaser prop replica? ...

2024-09-23T16:37:17Z

In reply to nevent1q…m6nn
_________________________

What, more photos of the TOS Star Trek mk2 phaser prop replica? Yes.

And there will be more.

#Scratchbuilt #PropReplica #StarTrek #TOS #Phaser

A quick tour of probably the smallest of my Fallout 4 ...

2024-09-18T16:36:40Z

A quick tour of probably the smallest of my Fallout 4 settlements.

I kept this build to repairs and defence for the single family farm.

This meant a lot of effort went into the decoration and story-telling.

#Fallout4 #FO4Mods #SettlementBuild

📽️ ~14 mins

https://youtu.be/1YUDLy_-EWo

Thank you.

2024-09-17T17:32:48Z

In reply to nevent1q…5gye
_________________________

Thank you.

Here you see the right side of the Wave Serpent I modified for my ...

2024-09-17T17:03:23Z

In reply to nevent1q…7lln
_________________________

Here you see the right side of the Wave Serpent I modified for my army/collection.

And the turrret I built, just to be different from stock, with an added missile.
The whole turret can rotate on it's mount, but I modified the guns to be able to elevate.

#Warhammer40k #PaintedMiniatures #MiniaturePainting #WaveSerpent #Eldar

The right side of the dino- / Deino-bot model. The raised leg ...

2024-09-14T17:01:33Z

In reply to nevent1q…z5vs
_________________________

The right side of the dino- / Deino-bot model.

The raised leg could either be as part of running, or attacking. As this is based on Deinonychus it has the single large toe claw and an attack would be with a kick.

#Scratchbuilt #ScaleModel #Dinosaur #Robot #HorizonZeroDawn #dinobot

More angles of the UFO abduction diorama. Parts include a ...

2024-09-13T16:47:36Z

In reply to nevent1q…6yg6
_________________________

More angles of the UFO abduction diorama.

Parts include a coffee-pod and the "wheel" from a vacuum cleaner.

#UFO #ScaleModel #Cow

BG3 #Spoilers Just check out the posse. While not at this point ...

2024-09-12T13:33:16Z

In reply to nevent1q…f6fn
_________________________

BG3 #Spoilers

Just check out the posse.
While not at this point of the game, I did have days with over 20 members in my party; quite a change from just 4.

Also, this run I tried to make bad decisions (not the obvious "good" choices), not to be evil, but to see how things turn out.

And yeah, some choices led to really bad outcomes.

By the end I only had Lae'zel, Shadowheart (Dark), Astarion (Ascended), Wyll (Pacted), Gale (God), and Halsin (really seemed the odd one out).

#BaldursGate3

Fourth Baldur's Gate 3 playthrough finished. This time I made ...

2024-09-12T13:16:42Z

In reply to nevent1q…442j
_________________________

Fourth Baldur's Gate 3 playthrough finished.

This time I made everyone spellswords, effectively. Except my Tav who I aimed to conjure as many summons as possible.

Final party members:
Desdemona Elara (Tav) Half-Drow elf - Sorcerer 6 (Draconic - Green) / Wizard 6 (Necromancy)

Shadowheart - Cleric 8 (light) / Wizard 2 (Divination) / Fighter 2

Lae'zel - Fighter 5 (Eldrich Knight) / Cleric 7 (War)

Astarion - Rogue 3 (Thief) / Fighter 9 (Eldrich Knight)

#BaldursGate3 #BG3

Thanks. Yes, it's a model that needed quite a few photos to ...

2024-09-11T17:34:56Z

In reply to nevent1q…93d6
_________________________

Thanks. Yes, it's a model that needed quite a few photos to replace "being held in the hand".

Thanks. Yes, anything like that. He was a "build it" ...

2024-09-11T00:21:39Z

In reply to nevent1q…dp46
_________________________

Thanks. Yes, anything like that. He was a "build it" first and worry about rules later, model.

Some more of the Raider Gunship conversion today. There's 2 ...

2024-09-06T17:40:13Z

In reply to nevent1q…jw6m
_________________________

Some more of the Raider Gunship conversion today.

There's 2 ways to mix model parts together; one is to perfectly merge them so nobody would notice.

The other is to embrace the differences in the parts and play with the joins and make it look "built" in-universe.

Both can work.

With obvious brackets, rivets, and snaking cables, you can tell which way I went with this model.

#Warhammer40k #MiniaturePainting #DarkEldar #RaiderGunship

While, I'm sure, you are all patiently waiting for part 6 of ...

2024-09-05T17:02:06Z

While, I'm sure, you are all patiently waiting for part 6 of "how I build in Fallout 4".

Here's the tour of my Warwick homestead settlement.

I made a specific mod just for this build, to remove some broken walkways. Allowing me to build out over the wastewater pools.

📽️ ~29 mins

#Fallout #Fallout4 #SettlementBuild

https://youtu.be/mcgtYwJAANU

Last few views of the Predator Tank. As I removed the interior ...

2024-09-03T19:47:22Z

In reply to nevent1q…0zf9
_________________________

Last few views of the Predator Tank.

As I removed the interior wall I had to create most of the interior details from scratch.
Switches, monitors and reinforcement structures. Plus ammo drums for the main and coaxial guns.

On the inside of the driver hatch I included latches and an Ork pinup to keep the driver happy.

#Warhammer40k #WarhammerCommunity #MiniaturePainting #PredatorTank #Scratchbuilt

Thanks. It was a fun build.

2024-08-31T09:29:53Z

In reply to nevent1q…rvkz
_________________________

Thanks. It was a fun build.

More of the pipe-work atop the "Refinery?" piece. This ...

2024-08-29T17:16:12Z

In reply to nevent1q…znza
_________________________

More of the pipe-work atop the "Refinery?" piece.

This time particularly the blue fractionating columns at the rear.
A mixture is heated and the vapours rise up the columns, specific liquids condense at certain heights/temperatures and are collected and piped off to be stored or used elsewhere in the structure.

#Warhammer40k #TabletopTerrain #Scratchbuilt #Refinery

That's fine, I mostly use Enamel paint anyway so I'm used ...

2024-08-26T17:54:21Z

In reply to nevent1q…33kc
_________________________

That's fine, I mostly use Enamel paint anyway so I'm used to non-water-based paint. Thanks, I might move it up the shopping list.

I've had that on my shopping list for so long, but never ...

2024-08-26T15:16:57Z

In reply to nevent1q…mmzz
_________________________

I've had that on my shopping list for so long, but never picked it up. Seems that it brushes on well, yes?

One of my older Fallout 4 settlements; The Slog. As there were so ...

2024-08-24T17:26:27Z

One of my older Fallout 4 settlements; The Slog.

As there were so many inhabitants already here when I found it, I wanted them safe, so this became one of the first settlements I built up.

Featuring a warehouse, poolside restaurant and a greenhouse.

📽️ ~10 mins

#Fallout #Fallout4 #Settlementbuild

https://youtu.be/xGEkEQRK6RE

A few more angles of the scatter terrain pieces I made to go with ...

2024-08-23T17:25:30Z

In reply to nevent1q…qhrn
_________________________

A few more angles of the scatter terrain pieces I made to go with the Infinity workshop.

While they were made to fit on the roof, you could scatter them anywhere around your table.

#TabletopTerrain #ScaleModel #InfinityTheGame

I do typically mix paints by eye for blending or for colours I ...

2024-08-21T19:00:12Z

In reply to nevent1q…86lf
_________________________

I do typically mix paints by eye for blending or for colours I don't have a pot of (purple is one, as you mention it). This is something I have always had a knack for.

But I rarely do more than a squad with one colour/scheme, and my own collection is all unique models, so I don't have to worry about getting colours the same every time.

A recipe is the sensible thing to do, but how close do the colours really have to be? Think of how colours can fade IRL with weather(ing) etc...

Thanks. It's just layers of 3 blues, same as on the coil.

2024-08-21T18:24:38Z

In reply to nevent1q…ul0u
_________________________

Thanks. It's just layers of 3 blues, same as on the coil.

Thank you.

2024-08-21T17:27:46Z

In reply to nevent1q…4wyt
_________________________

Thank you.

The fourth Plague Marine of this squad. I moved a sword to his ...

2024-08-21T16:55:41Z

In reply to nevent1q…yjhw
_________________________

The fourth Plague Marine of this squad.

I moved a sword to his back and added a strap and tentacles to hold it.
And I sculpted a flame for the plasmagun.

#Warhammer40k #Nurgle #PlagueMarines #Deathguard #MiniaturePainting

While I decide upon a colour scheme, here's the Ankylosaurus ...

2024-08-21T15:03:56Z

In reply to nevent1q…5zzf
_________________________

While I decide upon a colour scheme, here's the Ankylosaurus prime all in one colour.

#WIPWednesday #PaintingInProgress #Ankylosaurus

Thank you. A lot of really good results came together on this ...

2024-08-18T10:56:54Z

In reply to nevent1q…4mcn
_________________________

Thank you. A lot of really good results came together on this model.

Thanks. That's lighting for you; get it just right and a ...

2024-08-17T19:01:30Z

In reply to nevent1q…45rv
_________________________

Thanks. That's lighting for you; get it just right and a photograph just works.

Some moody shots of the broken bell tower. Rather than lighting ...

2024-08-17T17:33:41Z

In reply to nevent1q…4gvz
_________________________

Some moody shots of the broken bell tower.

Rather than lighting the piece for clear photographs, I placed the light outside the window slits.

#Scratchbuilt #TabletopTerrain #ttrpg #Batman #BrokenBellTower

... If not, how much do you hate the green? you could use it as a ...

2024-08-15T14:51:29Z

In reply to nevent1q…8fua
_________________________

...
If not, how much do you hate the green? you could use it as a base for a camo' pattern. Cover most of it with blobs of dark green, light and dark brown. Add shading/highlighting/weathering to taste.

Also, I would make the inside a different colour to the outside. Keep the green for one and change the other for something that contrasts with it. Light/dark or colour wheel.

As it is there, the metal areas just need finishing with some ...

2024-08-15T14:50:54Z

In reply to nevent1q…sz32
_________________________

As it is there, the metal areas just need finishing with some depth (wash and highlights). Add rust to taste.

The colours. I think the problem is that they are bright primary/secondary colours. This make it look toy-like and not "real".

First, do you have an army theme for this to add to?

to be continued...

Thanks. Yeah, that was my thinking. I already had the method for ...

2024-08-14T20:13:03Z

In reply to nevent1q…gx9y
_________________________

Thanks. Yeah, that was my thinking. I already had the method for creating wooden planks, so thought I'd try something mass-producible.
But I like customising things, so rather than just boxes I made these for people that would like to have boxes with stuff in, or whatever their imagination could do with 6 sides of a box.

Two final angles of the cartoon concept Tractor. The windows were ...

2024-08-10T16:55:33Z

In reply to nevent1q…w2ue
_________________________

Two final angles of the cartoon concept Tractor.

The windows were painted as if reflecting the sky and landscape (naturally a field).

#ScaleModel #tractor #cartoon #Scratchbuilt

The Ankylosaurus prime warrior thing, now has a flag. Fabric over ...

2024-08-10T12:32:22Z

In reply to nevent1q…nanf
_________________________

The Ankylosaurus prime warrior thing, now has a flag.

Fabric over a piece of metal from a modelling putty tube (toluene-based, hence the warnings).

The flag and rings are separate from the pole.
And the pole is textured with a layer of superglue.

Added a few more small details, such as switches on the weapon's grip.

#WIP #Ankylosaurus

Closer views of the broken statue's plinth and the shrine set ...

2024-08-09T16:22:40Z

In reply to nevent1q…e5gg
_________________________

Closer views of the broken statue's plinth and the shrine set up behind it.

While the plaque has been defaced with chaos graffiti, the ceremonial weapon remains.

The head has been placed on a makeshift table and turned into a shrine with candles and a scroll. A couple of the candles have fallen over when the barricade failed. The rest still cast light upon the head.

#Warhammer40k #WarhammerCommunity #TabletopTerrain #Statue

This miniature has been staring at me for months, and fresh from ...

2024-08-07T17:09:22Z

This miniature has been staring at me for months, and fresh from finishing the Grot on bike I got started.

The arms were sculpted to be down, so I have re-posed them to be raised (one to hold the weapon and other will hold a flag), and I added a few more arms.

The weapon is intended to look bashed together "in-universe", as is the theme of my army.
This also explains the tech-gizmo on it's head.

All together it is slightly larger than a normal Tyranid Warrior.

#WIPWednesday #Ankylosaurus

These models led me to some pretty gruesome photos while ...

2024-08-07T10:06:26Z

In reply to nevent1q…vys7
_________________________

These models led me to some pretty gruesome photos while researching "dead skin tones that were not green zombies".

I've seen some things so you don't have to... well you do, in model form.

They are happy chappies. Thanks.

2024-08-07T09:42:10Z

In reply to nevent1q…c2pa
_________________________

They are happy chappies. Thanks.

Close-ups of Pox Walkers #6 (Vanilla) and #16 (Conversion). While ...

2024-08-06T17:17:44Z

In reply to nevent1q…avrk
_________________________

Close-ups of Pox Walkers #6 (Vanilla) and #16 (Conversion).

While the vanilla model had a dangling gas mask, I gave the conversion a tiny arm holding the mask.

#Warhammer40k #WarhammerCommunity #MiniaturePainting #Nurgle #PoxWalkers

Shows you how long it's been since I've seen one. Next ...

2024-08-03T09:39:30Z

In reply to nevent1q…jusc
_________________________

Shows you how long it's been since I've seen one.

Next you're going to tell me that they've changed how to do the recovery position again. Ha Ha.

The last time I did one of those, everyone commented on how ...

2024-08-02T15:50:21Z

In reply to nevent1q…kvm0
_________________________

The last time I did one of those, everyone commented on how "Blasé" I was using the CO2 with one hand in my pocket.
I don't know what everyone expected me to do with my other hand? As you know, unlike water, you should not touch the horn of a CO2 while spraying.
It wasn't the first time I'd used one and I'm not much of a "jazz hands" kind of person.
It was ready to go and my left hand was already in my pocket, the fire was no less put out when I'd finished.

I am still working on part 6 of my "how I build in Fallout ...

2024-08-01T17:00:36Z

I am still working on part 6 of my "how I build in Fallout 4".
It's slow going, with many distractions.

While you wait, here's the tour of the settlement that I built at Jamaica Plain for this series.

📽️ ~ 16 mins

#Fallout #Fallout4 #SettlementBuild

https://youtu.be/GH0atL-URiM

Grot on motorbike. This diminutive greenskin should be riding a ...

2024-07-22T12:25:36Z

Grot on motorbike.

This diminutive greenskin should be riding a wolf, but now clings on to a bike from FenrisGames (npub12mq…zynt)

Some modifications were made to both the grot and bike.

#GrotBiker #Orks #Warhammer40k #WarhammerCommunity #Motorbike

The thunder hammer option for this Chaos Dreadnought. Again, ...

2024-07-18T16:39:22Z

In reply to nevent1q…hxz0
_________________________

The thunder hammer option for this Chaos Dreadnought.

Again, scatchbuilt and magnetized.

#Warhammer40k #PaintingMiniatures #Helbrute #ChaosDreadnought

Views of the undersides of the Multi-ped forklift. You can also ...

2024-07-11T17:41:17Z

In reply to nevent1q…08y8
_________________________

Views of the undersides of the Multi-ped forklift.

You can also see the pegs under the top half that stay inside the ring of the lower half to keep it rotating in the correct place.

and the fork position to accomodate the pallet accessories.

#Scratchbuilt #ScaleModel #Forklift #TabletopTerrain

The first pistol you are given in The Outer Worlds. 1:1 scale ...

2024-07-10T17:42:20Z

The first pistol you are given in The Outer Worlds.

1:1 scale prop replica.
Built from scratch using wood, plastic and epoxy putty.

It's not the best choice, it's Spacer's choice!

#ScaleModel #PropReplica #Scratchbuilt #TheOuterWorlds

More views around the Messerschmitt Bf 109. I mounted it at this ...

2024-07-09T16:41:47Z

In reply to nevent1q…08zl
_________________________

More views around the Messerschmitt Bf 109.

I mounted it at this jaunty angle to show it going down in flames.

#ScaleModel #Bf109 #repair #Aircraft

The figures of the Polania Republic faction of the Scythe ...

2024-07-08T17:18:20Z

In reply to nevent1q…wr4j
_________________________

The figures of the Polania Republic faction of the Scythe boardgame.

Anna and Wojtek the bear with a squad of white mechs.

#Scythe #Boardgame #MiniaturePainting

You can find some mobile device wallpapers on my kofi page. FREE. ...

2024-07-01T17:22:12Z

You can find some mobile device wallpapers on my kofi page.
FREE. No login or donations required.

Get some paint splatter on your phone or tablet without the mess.

https://ko-fi.com/album/New-Album-S6S6I77N5

#Kofi #Wallpapers #Paint #Art

And the third Baldur's Gate 3 playthrough is done. Big ...

2024-06-28T12:20:50Z

In reply to nevent1q…weeh
_________________________

And the third Baldur's Gate 3 playthrough is done.

Big #Spoiler #Spoilers below.

My first Tactician run. I also went all-in on multiclassing.

Final party members:
Thrymr Yergk (Tav) - Sorcerer 3 (Wild Magic) / Bard 9 (Valour)

Minthara - Paladin 6 (Vengeance) / Warlock 6 (GOO)
First time I managed to save her.

Lae'zel - Fighter 8 (battlemaster) / Ranger 4 (Gloom stalker)
As this time I took the change myself.

Astarion - Rogue 5 (Thief) / Fighter 7 (Eldrich Knight)

#BaldursGate3 #BG3

Together with the removeable roof, the Hut on Mound also has ...

2024-06-20T17:32:53Z

In reply to nevent1q…lfa5
_________________________

Together with the removeable roof, the Hut on Mound also has sliding doors (which can also be removed if you like).

#ScaleModel #Scratchbuilt #TabletopTerrain #HutOnMound

Some views of the black bear mini from the Beorn diorama. This ...

2024-06-19T17:12:09Z

In reply to nevent1q…ujca
_________________________

Some views of the black bear mini from the Beorn diorama.

This bear is so large it can totally eclipse the Beorn mini', much like his bear form would erase all Beorn-like qualities.

#MiniaturePainting #Hobbit #LoTR #Beorn #Diorama

In the broken corner of the Sprue Hut is a collection of plants ...

2024-06-18T17:33:05Z

In reply to nevent1q…yl4l
_________________________

In the broken corner of the Sprue Hut is a collection of plants growing around the remains.

And yes, they are all made from sprue. Using a tutorial I found on the internet.

#ScaleModel #TabletopTerrain #Scratchbuilt #SprueHut

The CD City, as a sci-fi city, took some inspiration from Blade ...

2024-06-06T16:38:02Z

In reply to nevent1q…ku35
_________________________

The CD City, as a sci-fi city, took some inspiration from Blade Runner; Large billboard screen showing a giant face, and the blimp carrying more advertising.

Again, that face was a challenge in itself; it's small enough to fit on your smallest fingernail.

#CDCity #Scratchbuilt #Art

Yet more views of the TOS Star Trek mk2 phaser prop replica. ...

2024-06-05T17:04:49Z

In reply to nevent1q…um6t
_________________________

Yet more views of the TOS Star Trek mk2 phaser prop replica.

#Scratchbuilt #PropReplica #StarTrek #TOS #Phaser

The pilot of the modified Wave Serpent, true to my army's ...

2024-06-03T17:51:13Z

In reply to nevent1q…pz02
_________________________

The pilot of the modified Wave Serpent, true to my army's form, is just a head supported by a mass of wires.
You can just about see his grin through the cockpit window.

#Warhammer40k #PaintedMiniatures #MiniaturePainting #WaveSerpent #Eldar

Second playthrough ended a while ago and I forgot to update here. ...

2024-06-02T20:49:12Z

In reply to nevent1q…r0me
_________________________

Second playthrough ended a while ago and I forgot to update here.

Final stat's:
See alt text of the pic's for equipment lists.

Final party members:
Foweih Ramekin (Tav) - Monk (Open hand)
Oh blimey, she punches like a sack full of trucks.

Lae'zel - Fighter (battlemaster)
She's just so useful in a fight.

Gale - Wizard (abjuration)
With all the kit (+DC/spell attack) I gave him, every spell was >99%.

Wyll -Warlock
Thought I'd bring along the man of the city for a change.

#BaldursGate3 #BG3

Some more views of the Deino-bot / Dino-bot. I wanted a dynamic ...

2024-06-01T17:26:35Z

In reply to nevent1q…f8z8
_________________________

Some more views of the Deino-bot / Dino-bot.

I wanted a dynamic pose and settled for running as that, at least, gave me one point of contact with the ground.

There's a thick wire up from the base into the hips that is hidden within the leg. This allowed me to keep the legs thin without the risk of breaking.

#Scratchbuilt #ScaleModel #Dinosaur #Robot #HorizonZeroDawn #dinobot

UFO abduction. Scale model, built from scratch with added LEDs. ...

2024-05-30T17:51:19Z

UFO abduction.

Scale model, built from scratch with added LEDs.

It amuses me that the UFO is clearly not large enough to house a cow of this size.

Idea "stolen" from the internet.

#UFO #ScaleModel #Cow